CT5806 Creative Labs Audio PCI 128D Digital Sound ES1373 Chipset Soun Card- Cable and Installation Software CD Included

Manufacturer: Creative Lab
Model: CT5806
P/N: 6001503
Availability: 1 In Stock
Condition: Like New. Excellent
Warranty: 30 Days

Buy it today, Ships today!!!

Creative Labs Audio PCI 128D Digital Sound Card [Part #6001502] 
Creative Labs Audio PCI 128D Digital Sound Card [Part #6001503] 

Cable and Installation Driver/Software Included: Compatible with Windows XP/ME/2000/NT/95/98

Part Number: 6001503 Creative Labs CT5806 Audio PCI 128D Digital Sound Card
Specifications
Part number 6001503,6002316 
The following specifications concern the host interface, synthesizer, digital, audio mixing, internal audio connectors, and external audio connectors. 
Host interface

Port address
One 64-byte I/O port

Interrupt usage
One PCI interrupt

Number of ports
One stereo input port

One mono microphone input port with 5-V BIAS power and 20-dB boost available

One stereo output port

One stereo internal CD audio input connector

One internal TV tuner input connector

One internal mono modem/TAD I/O connector

MIDI Synthesizer

Architecture
Digital wavetable synthesis

Channels
16 MIDI channels

Number of voices
128 Voice polyphony and Mulit-timbral capability

Number of instruments
128 GM compatible instruments

Sound Sets
2MB, 4MB, and 8MB sample sets
GS sound set + 10 drum kits in 4 and 8 megabyte sample sets

D/A converter
18-bit linear serial Sigma-Delta converter

Level and panning controls
Separate 5-bit L and R controls for each voice

Envelopes
Per-voice envelopes for amplitude and filters

FM synthesis
OPL2 FM software emulation
Advanced Wavetable Sysnthesis Engine

Digital Effects
Digital effects engine for reverb, chorus, and tone control

Digital

PCM playback section

Devices
One wave output (playback) device

One wave input (record) device

D/A converter
18-bit linear serial Sigma-Delta converter

Maximum playback sample rate
5–48 kHz

Level and panning controls
Separate 5-bit L and R controls for each voice

Data formats
8-bit unsigned linear, 16-bit signed linear 
All formats mono or interleaved stereo

Digital recording section

A/D converter
16-bit linear serial Sigma-Delta converter

Available sampling rates
5–48 kHz

Source selection
Any external source, microphone, CD, synthesizer, wave, modem, or TV tuner

Level control
Individual

Level control range
+12 to –50 dB on all other record sources

Formats
8-bit unsigned linear, 16-bit signed linear 
All formats mono or interleaved stereo

Audio mixing

Input sources
Synthesizer output, CD input, Aux input, MIC input, TV tuner input, modem input/output

Level control
5-bit for all mixer control

Level control range
+12 to –50 dB for all

Frequency response
20–20,000 Hz ?1 dB

Distortion
<0.01 %

Signal/Noise ratio
90 dB typical

Internal audio connectors

CD in

Connector
MPC III standard (Molex 70553) 4-pin shrouded 0.1-inch centers

Pin 1
= L channel

Pin 2
= Ground

Pin 3
= Ground

Pin 4
= R channel

TV tuner in

Connector
MPC III standard (Molex 70553)

Pin 1
= L channel

Pin 2
= Ground

Pin 3
= Ground

Pin 4
= R channel

TAD in/out

Connector
MPC III standard (Molex 70553) 4-pin shrouded 0.1-inch centers

Pin 1
= Modem audio output

Pin 2 
= Ground

Pin 3
= Ground

Pin 4
= Boosted (30 dB) microphone output

External audio connectors

MIC in

Connector
3.5 mm (0.125-inch) mini phone jack

Tip
= Signal

Ring
= Bias (+5 V - 4.7K)

Sleeve
= Ground

Nominal input level
100 mV r.m.s. maximum

Nominal input impedance
= 50K Ohms

Aux in

Connector
3.5 mm (0.125-inch) TRS mini phone jack

Tip
= L channel

Ring
= R channel

Sleeve
= Ground

Nominal input level 
1 V r.m.s. (2.8 V p-p)

Nominal input impedance
= 50K Ohms output

Line out

Connector
3.5 mm (0.125-inch) TRS mini phone jack

Tip
= L channel

Ring
= R channel

Sleeve
= Ground

Maximum output level info into a line input
= 2.13 V r.m.s. (6 V p-p)

Maximum output level info into headphones
= 20 mW into 28 Ohm headphones

Digitized Sounds 
Windows Operation Playback of audio channels each at an arbitrary sample rate
Audio channel can playback either 8-bit or 16-bit data from host memory, mono, or stereo.
48kHz recording from AC'97 sample rate converted to from 4-48kHz into host memory
Playback Sources: CD Audio, Line-IN, Microphone, Auxillary, TAD-IN, MIDI, and Wave
Recording Sources: CD Audio, Line-IN, Microphone, Auxillary, TAD-IN, MIDI, and Wave

MS-DOS Operation Sound Blaster 16 PCI Compatibity
Uses a single shareable interrupt

3D Audio Technology Multi-Algorythm reverb and chorus
Support Microsoft DirectSound 3D
Support Aureal A3D API
Improves sound clarity, spatial realism and sound effects, through the minimization of crosstalk
Dynamically adjust for monophonic or stereophonic input withoput user intervention

I2S Input Allows for digital audio input from external device (i.e. 2-channel decoded AC-3 from DVD decoders
Aidio data is transfered using Serial I2S format

S/PDIF Digital Audio Ouput Transmit audio streams at 16-bit 48kHz sample rate
Transmit compressed AC3 data
Mix in real time analog inputs vis CD audio, Line-IN, and micorphone input
Selectable autosense, for either digital or analog circuitry



Electrical Characteristics 
Parameter Symbol Minimum Typical Maximum Unit 
Power Supplies: Digital VCC -0.3 6.5 Volts 
Power Supply Current 
D0-Normal Operation 
Power On 100.5 mA 
MIDI Only 103.1 mA 
Wave Only 103.1 mA 
MIDI + Wave 103.1 mA 
DOS Mode 85.5 mA 
D2-Power Down 65.0 mA 
D3-Clocks Power Down 3.38 µA 
Storage Temperature -40 150 0c 

External Audio Connectors
Part Number: 6001503Creative Labs Audio PCI 128D Digital Sound Card
Audio out jack – The green jack is a stereo line-level output. The combined signal of all internal and external studio sources on the board outputs through here. It can be connected to one-eighth of an inch stereo headphones or amplified speakers. 

Audio in jack – The black or blue jack is a stereo line-level input, which accepts a one-eighth of an inch stereo plug. It can be used as a source for digital sound recording, a source to be mixed with the output, or both. 

Microphone input jack – The red or pink jack is a one-eighth of an inch jack providing mono input. It can be used as a source for digital sound recording, a source to be mixed with the output, or both. 


Internal audio connectors
Show Part Numbers
Hide Part Numbers
6001503, 6002316

The internal audio connections are, from left to right, CD audio in, TV tuner in, and TAD in (modem).

Chipset
Part Number: 6001503Creative Labs Audio PCI 128D Digital Sound Card
Creative's new chipset uses breakthrough technology to take full advantage of the PCI bus architecture, while maintaining compatibility with older legacy software. Legacy game compatibility was originally an issue when considering a PCI-based sound card solution. The issue was that existing software and games for the computer had been designed to run on ISA-based sound cards. To function properly, those cards must write directly to the inherently slow ISA DMA controller. These signals are not present on the PCI bus. This allows legacy software to function as if the ISA signals are present, while using the faster speed of the PCI bus

Codec chip
Part Number: 6001503Creative Labs Audio PCI 128D Digital Sound Card


The codec chip is used in compressing and decompressing audio signals for use by the sound card.